Seals Individual

Quad-ring black nitrile rubber - sold individually.
Appearance is matte black
Standard compound for static and dynamic seals
Measurements are internal diameter and cross section width. Learn More

O-ring black nitrile rubber - sold individually.
Appearance is matte black
Standard compound for static and dynamic seals
N90 code is a harder grade
Measurements are internal diameter and cross section width.

Learn More

O-ring Polyurethane - sold individually.
Appearance is clear to light brown
Tougher than black nitrile rubber
90 is a harder compound than 70
Measurements are internal diameter and cross section width. Learn More

27.3 x 35 x 3.5/5 mm Wiper seal (Manitou)
Fits Manitou Swinger Air, Radium, LRS, S-Type, etc rear shocks
Also fits some DT, Kona and Lapierre branded rear shocks.

Manitou P/N 83-2720

Learn More

0.375 inch shaft wiper seal
Fits Fox Vanilla coil shocks 1997-2004
H type double acting
NBR black rubber material

Shockcraft Part Code: S-FWI-0.375x0.687x0.194-H-NBR

Available with our comprehensive Rear Shock Service Kits for the Vanilla Coil Shocks 1997-2004 Learn More

1/2" H Type wiper seal - NBR Material
Dual lip type, wipes both ways.

Shockcraft Part Code: S-FWI-0.5x0.912x0.194-H-NBR

Learn More

0.812" AN Wiper Seal
13/16" shaft size

Shockcraft Part Code:  S-FWI-0.812x1.084x1.07-AN Learn More

AN 106 Wiper seal
1 1/6" shaft size

Shockcraft Part Code:  S-FWI-1.06x1.33x1.07-AN

Learn More

0.5 inch shaft Wiper Seal
D type single lip
NBR black rubber material

Shockcraft Part Code:  S-FWI-0.5x0.75x0.125-D-NBR Learn More

0.5 inch shaft Wiper Seal
D type
PU blue polyurethane material

Shockcraft Part Code:  S-FWI-0.5x0.75x0.125-D-PU



Learn More

1 1/8" x 1.339 x 0.107 AN Wiper
Fits vintage Manitou 3,4 & EFC forks.
Fits several X-fusion & Specialized air shocks. Learn More

28 x 34 x 2/3.5 mm Wiper seal (Manitou)
Fits Manitou McLeod rear shocks

Manitou P/N 08-30019 Learn More

1.25" AN Wiper Seal

Shockcraft Part Code:  S-FWI-1.25x1.522x1.07-AN Learn More

Travel check o-rings for installation on fork stanchions or shock bodies below air can
Black nitrile rubber
Appearance is matte black

Learn More

IFP Pellet for Fox shocks using needle inflation system.
6.5mm diameter.

Shockcraft Part Code:  SC-IFP-PELLET-6.5 Learn More

5/8" H Type wiper seal - NBR Material
Dual lip type, wipes both ways.

Shockcraft Part Code: S-FWI-0.625x0.937x0.194-H-NBR

Learn More

14 mm shaft Wiper Seal
D type
PU blue polyurethane material

Shockcraft Part Code:  S-FWM-14x22x5-D-PU



Learn More

This single RockShox pick tool helps you to carefully remove O-rings during service.
Pick tool is 140 mm length.
Made from a non-scratch composite (fibreglass reinforced nylon) material.

SRAM Part Code: 00.4318.012.013 (for a set of 5) Learn More

O-Ring
Replaces wire clip in the base-valve which breaks causing a knock.
Bomber CR 2018+ (and Fox Van RC 2011+)
Sold individually

Shockcraft Part Code:  S-OR-MET-BomberCR-BV Learn More